Видео

Can you use this on IKEA Omar shelving unit?

How about when you buy and self assemble a cart, and a back wheel falls off? I did that, after two wheels broke and fell off my previous cart.

Very helpful. Thank you.

😅😅😅

2 things. I would love to see a drill powered level adjuster on these foot pads. Another great feature would be if you could prevent the caster from swiveling. i roll my wood lathe outside and I need 2 fixed wheels on one side and 2 swivel on the side facing me

How do you compress the spring for when you have uneven grounds?

thank you

can tou remove the caster from the wheel? One of mine broke and i removed the part from the chair but the part in the wheel is stuck

to put the wheels when its rly tough, you can put it while its in standing position and have a sit on the chair, your weight will do the job, but to do this you have to be careful.

Dude, you show how to install a Caster that the stem is in. Show me how to install a Caster onto a stem when the stem is already inside the chair. I have a chair where the stem is already in the chair. I need to know how to install a stemless Caster wheel onto a stem. The internet has nothing that will help me. And I'm getting very frustrated and angry about it. I've been looking for months. And I find nothing.

WD-40 did the trick! I’m so excited! Only, I couldn’t put the cover on, it was just too big. Fits without it. WD 40 and a great grandmother with emphysema just did it without a hammer! I love me some WD 40! Yes, I do! Thank you so much for showing how to do it though. The older I get, the more I need a bit of guidance. LOL

I got my wheels, they look just like the ones you have, but they are too big! Oh no!

WD 40 is my friend! 😅

I want something that I can use on asphalt, sidewalk & epoxy floors. The casters I have now make a ton of noise, some from the wheel & some is from play in the bearings etc... What do you have for me???

Thank you . I used your instructions to remove the casters . Fortunately my new ones went in easily

There are a couple of issues here, the most important one bing that the casters put a lot of torque on the endgrain of a quite thin piece of wood. Granted, the total weight of the person sitting is distributed over all four of them but still, in time the legs may split. Also i wonder why you were using a masonry bit to drill wood. 😊

Thanks; concise, clear-cut, understandable explanation of the distinction between pneumatic and flat free tires. Trying to convince myself to go with flat free but thanks to your vid pneumatic is my best choice.

Should the spring be compressed before mounting? I have sloping ground. Do I install wheel to touch ground at lowest point and it compresses as it goes uphill? That might lift the gate too much. Do I install wheel at uphill (closed) position with spring adjusted for level gate ?

When threaded T-nuts with prongs come loose or fall off after installing them in furniture like chair legs, there are a few solutions and precautions to take into consideration: ⚫Add Adhesive: For added security, apply a strong wood adhesive or epoxy in the hole before inserting the T-nut. This helps to lock the T-nut in place within the wood. ⚫Use a Screw: Hammer the T-nut into place and then secure it with a small hinge screw in the center of the cross shape to prevent it from backing out or rotating. 🔴We did not use these methods in the video but highly recommend both to ensure the t-nuts stay in place and that you are a happy customer.

'Promo sm'

📦 Where to Get Your Casters: www.casterhq.com/Chair-Casters-s/323.htm

5:30 - missing essential info - the tread has a crown and the core is cast iron.... but *what is the tread made of* ?

Thank you! This video was so simple and easy to understand. I was able to change mine out.

Get Yours Here Today: www.casterhq.com/aht-jr-convertible-hand-truck-included-wheels-p/aht-jr.htm

Visit our website to view our large selection of Shim Plates & Weld Plates: www.casterhq.com/weld-shim-caster-plates-s/3930.htm

hello sir can you teach how to design caster wheel brackets

Where do i find the link to the type of gate wheel you are using?

Thanks dude!

bought a set today for my ss table for a 8 burner flame top.

Helped a ton. Just bought a Bluepoint cart second hand and the wheels are shot

Hi, i have double wood doors. Each door is 240lbs. I need to find casters that would relieve some weight from the posts and hinges. i want to install the casters lower to increase the support to the doors, by using the spring compression. I guess I am hesitating between medium and heavy duty casters. What would you do?

Ecellent video. Thank you very much..

Is there anything just like this that has an adjustable height of 3 inches? I’m wanting to put these on a work table for woodworking that I wheel around the garage for various applications, but 1 would be as an outfeed table to my table saw, jointer, planer etc. the height difference in those 3 tools is about 2.5 inches so I was wondering if there was a product that had that height range capability? Thanks!

I have been looking at 6" caster wheels. What would be the approximate ground clearance if 4 were attached to a small cart or trailer. I'm guessing that the ground clearance would be at or close to 3 inches. Am I even remotely close to the actual ground clearance? Thanks in advance for any and all advice, opinions, or answers. Regards

can this work with a small 3000 lbs Power Pallet truck as well?

Why use latex gloves? Poser

thanks for the info, very informative!

I just ordered one of these dollies! Thank you for the recommendations! My husband will love this for his shop!

for whomever it may concern, if the removal is hard for a caster wheel, try using the head of a hammer for leverage to pull it out and loosen it

WHAT ABOUT THE CASTER WHEEL THAT’S FEATURED IN THE PICTURE BEHIND YOU? THANKS 😊

Any idea how to make these?

Would’ve benefited from a side by side comparison of old vs new. I need a taller chair profile bc my arms are going numb at my desk. And I’d rather not cut down the legs of my desk

Do the pneumatic tires puncture as easily as bike tires? Like say on yard torns like Tribulus terrestris, aka as caltrop, goat's head, sticklers?

Thanks a lot. I found this video to be very helpful. This video helped me remove casters from my chair in just 10 minutes.

video worked, was just about to buy from another website and found this video... thanks

Actually the rollerblade wheels are the best

Any time this man says 'affordable' it is clear he means 'cheap'

What's the best caster for a chair on office carpet?

Please accept my heartiest thanks for posting such an informative video.